{"type":"doc","content":[{"type":"layoutSection","content":[{"type":"layoutColumn","attrs":{"width":25.0},"content":[{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"layoutColumn","attrs":{"width":50.0},"content":[{"type":"heading","attrs":{"level":1},"content":[{"text":"Symptoms","type":"text"}]},{"type":"paragraph","content":[{"text":"The TouchOne displays a Address Conflict Failure - Error 010 screen:","type":"text"}]},{"type":"mediaSingle","attrs":{"layout":"align-start"},"content":[{"type":"media","attrs":{"type":"external","url":"https://eightdevelopment.atlassian.net/wiki/download/attachments/37847044/P%20-%20Error%20-%20Connection%20Failure%20010%20%28Address%20Conflict%29.png?version=1&modificationDate=1474924783810&api=v2"}}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Problem","type":"text"}]},{"type":"paragraph","content":[{"text":"The TouchOne is set to an address that is conflicting with another keypad or device on the BUS.","type":"text"}]},{"type":"heading","attrs":{"level":1},"content":[{"text":"Solution","type":"text"}]},{"type":"extension","attrs":{"extensionType":"com.atlassian.confluence.migration","extensionKey":"legacy-content","text":"Ensure the correct address has been selected on the Touch One. Using the onscreen selection, set the Touch One to a non conflicting Address. The address needs to be configured on the Bosch Alarm panel, to ensure the area is active. The alive LED on the back of the Touch One should be flashing at a regular interval","parameters":{"nestedContent":{"type":"doc","content":[{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"bulletList","content":[{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"Ensure the correct address has been selected on the Touch One. Using the onscreen selection, set the Touch One to a non conflicting Address. The address needs to be configured on the Bosch Alarm panel, to ensure the area is active.","type":"text"}]}]},{"type":"listItem","content":[{"type":"paragraph","content":[{"text":"The alive LED on the back of the Touch One should be flashing at a regular interval","type":"text"}]}]}]}]}]}],"version":1},"cxhtml":"

- Ensure the correct address has been selected on the Touch One. Using the onscreen selection, set the Touch One to a non conflicting Address. The address needs to be configured on the Bosch Alarm panel, to ensure the area is active.
- The alive LED on the back of the Touch One should be flashing at a regular interval

","reason":"multi-level-list-indentation"}}},{"type":"paragraph","content":[{"type":"hardBreak"}]}]},{"type":"layoutColumn","attrs":{"width":25.0},"content":[{"type":"paragraph","content":[{"type":"hardBreak"}]}]}]}],"version":1}

Error Code 010 - Address Conflict

Symptoms

Problem

Solution